I needed a small filter for my PVC aquaponics
this cost me less then 20 bucks and I think it could run 3 or 4 more pvc pipes
I used:
2 buckets 1 square and 1 round
3 electrical coupling PVC and some 1 inch diameter PVC I had from my aquaponics system
filter media 4 bucks for a meter
I just get water from my GB primary hose to the swirl filter then to a media filtration
the key of the swirl filter is to put the hose on the water level and let the gravity do the rest
I clean the filter at the sump tank so they dont get wasted on the filter
![]()







Reply With Quote





